Description

There are numerous possibilities to improve the road holding. By replacing the original, soft, torsion bar rubbers with these urethane versions, the car will be sprung more rigidly, resulting in better road holding. It is recommended to replace both the inner and outer rubber to achieve the maximum result.

These urethane torsion bar rubbers may creak after assembly; applying a little vaseline to the rubbers will reduce the creaking significantly. Once the rubbers are worn in, the vaseline will have disappeared, and the improved road holding will become noticeable.

There are two types of urethane rubbers, those with knobs on the outer side and the fully round versions with different inner diameters.

Urethane rubbers must have a perfect fit, as they do not bend like the original rubber, which is why the inner diameter deviates from the original. It does not always mean that the indicated rubber for your year of construction is the correct one, as it also depends on which torsion bar cover is installed.

The year of construction is indicated for the original torsion bar covers and original spring plates. When assembling new covers, different spring plates, or adjustable spring plates, make sure to choose the correct rubbers.

Approximately 48 mm in diameter
Sold in pairs

Suitable for:
Beetle with IRS
Karmann Ghia with IRS
Type 3 8.1968 and later
Kübel